Case history AGRI ROK used for heavy duty concrete
overlay industrial floor

A major paint reclaim facility had problems with their existing bare concrete floor that was covered with a thick paint residue in some areas over ¼” thick. The room where the floor is was called the pump house. This area takes waste solvent based paint by drums or tanker wagons. The paint waste is mixed together to a uniform consistency and then pumped away for processing. Drums are inverted and spills are common. The cleaning of the floor was done by solvent mopping of the floor to remove paint residues on the floor. The floor is exposed to heavy duty fork lift traffic.

Ph 586-792-3325 F 586-792-2711 EM [email protected]

PO BOX 46474 Mt Clemens, MI 48046

Web chemicalcontainment.com

The installation steps were as follows:

The surface preparation was a real challenge. UCC and their professional crew

used a combination of safe surface prep techniques.

First Step was to power wash the floor after a soak in a heavy duty NSF

approved “Green" alkaline cleaner called Chrisal CMF 240.

The CMF 240 was sprayed on at full strength and left to soak into the paint

residue using a pump up sprayer. The use of a floor scrubber with stiff bristles

was used to remove surface paint residue